Вышла новая прошивка для KikkoLB 2.5 Lvz
Очень много изменений с 2008 года и похоже добавили EVA-DTS. На днях будем проверять.
Версию 2.4 не выкладываю т.к. тут же вышла 2.5 с фиксами. Что было сделано в 2.4:
* The software release Kikko Rev. 2.4 LVZ is compatible only with the version Scheda Relè Rev.2.4 LVZ.
* Management of Kikko-Snakky master-slave link. (The Sw. Kikko Rev. 2.4 LVZ can work only with Rev. Snakky 3.0 and Rev. Snakky SL 2.0 or upper).
* For the payment system setting it is used the menu 220.127.116.11. In case of situation without payment system it is needed to set this parameter to OFF.
* Language of default: Italiano.
* Other available languages: Francaise, Espanola, English, Deutsch, Portugues, Nederlands, Polsky, Czech, Slovak, Русский, Croate, Finnish, Danish, EΛΛΗΝΙΚΑ, Ungaria, Svenska, Srpski, Slovensko.
* For coffee-based selections where some water comes before the coffee the management of the pressure on the capsule has been changed
* Up-Key management to read/write set-up and read statistics.
* Improved management of hot water selection.
* Fan works only when the beverage is dispensed.
* SW management of “self-repositioning” for the coffee unit.
* SW compatible also with the new electronic boards.
* Introduced the chance to wash the Coffee Unit both automatically (TECH. 2.6.5) and manually (TECH. 18.104.22.168).
* Introduced the check which does not allow automatic washing (for mixing bowls and brewer) if the machine has not been switched on from at least one hour.
* The way the rotor (of the volumetric counter) failure is managed has been changed when it is due to a coffee selection (water gets through the capsule too slowly).
* The management of the “mezzaluna” (metal plate fitted between the shelf and the brewer to allow the brewer to reposition correctly at the end of the cycle) has been added.
* Increased the pause between the closure of the valve to create pressure and the repositioning of the brewer.
* When chosen by specific button or by password, introduced the management of washing brewer and mixing bowls in a row, while the automatic washing of the parts are still separated.
* The time the fan works can be managed: either continuously (default setting) or only for a while (during the selection and just few seconds after).
* Introduced L03 and L04 lay-out with cold selections (cold unit should be fitted).
* Management of without sugar programmable function